-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

[slackware-security]  Slackware 14.2 kernel (SSA:2021-072-01)

New kernel packages are available for Slackware 14.2 to fix security issues.


Here are the details from the Slackware 14.2 ChangeLog:
+--------------------------+
patches/packages/linux-4.4.261/*:  Upgraded.
  These updates fix various bugs and security issues, including the recently
  announced iSCSI vulnerabilities allowing local privilege escalation.
  Be sure to upgrade your initrd after upgrading the kernel packages.
  If you use lilo to boot your machine, be sure lilo.conf points to the correct
  kernel and initrd and run lilo as root to update the bootloader.
  If you use elilo to boot your machine, you should run eliloconfig to copy the
  kernel and initrd to the EFI System Partition.
  For more information, see:
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2021-27363
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2021-27364
    https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2021-27365
  (* Security fix *)
+--------------------------+


Where to find the new packages:
+-----------------------------+

Thanks to the friendly folks at the OSU Open Source Lab
(https://osuosl.org/) for donating FTP and rsync hosting
to the Slackware project!  :-)

Also see the "Get Slack" section on http://www.slackware.com/ for
additional mirror sites near you.

Updated packages for Slackware 14.2:

Updated packages for Slackware x86_64 14.2:


MD5 signatures:
+-------------+

Slackware 14.2 packages:
ff9a6c47fccf6d014581f5d42d3188fc  kernel-generic-4.4.261-i586-1.txz
a436346a1010bb22e19d6ca3378e1d46  kernel-generic-smp-4.4.261_smp-i686-1.txz
75ad52f57bcce2ac867a3ed53f889a3b  kernel-headers-4.4.261_smp-x86-1.txz
03836f4982cbf694d3ed6966625d52e2  kernel-huge-4.4.261-i586-1.txz
8c86b6d61b4d6294a063e1c3a2cf9827  kernel-huge-smp-4.4.261_smp-i686-1.txz
f49160e776ab57cc93a6791b5ab4a50e  kernel-modules-4.4.261-i586-1.txz
53d373c6f2e4a3f88d0bb2a078cee337  kernel-modules-smp-4.4.261_smp-i686-1.txz
f56f386ad659dfdbae8040cf438a1877  kernel-source-4.4.261_smp-noarch-1.txz

Slackware x86_64 14.2 packages:
82cf14abb50fd2260eb0cd67a59d5f0c  kernel-generic-4.4.261-x86_64-1.txz
1a59ef6c4a8c0f2164919936b345ced8  kernel-headers-4.4.261-x86-1.txz
7ca804517bf8c0149a3eb4990c1b2c47  kernel-huge-4.4.261-x86_64-1.txz
0aeded79bd3ab9e8fa0dcb39c41023db  kernel-modules-4.4.261-x86_64-1.txz
8c9075bd6abda8952efd5a5fd453ee9a  kernel-source-4.4.261-noarch-1.txz


Installation instructions:
+------------------------+

Upgrade the packages as root:
# upgradepkg kernel-*.txz

If you are using an initrd, you'll need to rebuild it.

For a 32-bit SMP machine, use this command (substitute the appropriate
kernel version if you are not running Slackware 14.2):
# /usr/share/mkinitrd/mkinitrd_command_generator.sh -k 4.4.261-smp | bash

For a 64-bit machine, or a 32-bit uniprocessor machine, use this command
(substitute the appropriate kernel version if you are not running
Slackware 14.2):
# /usr/share/mkinitrd/mkinitrd_command_generator.sh -k 4.4.261 | bash

Please note that "uniprocessor" has to do with the kernel you are running,
not with the CPU. Most systems should run the SMP kernel (if they can)
regardless of the number of cores the CPU has. If you aren't sure which
kernel you are running, run "uname -a". If you see SMP there, you are
running the SMP kernel and should use the 4.4.261-smp version when running
mkinitrd_command_generator. Note that this is only for 32-bit -- 64-bit
systems should always use 4.4.261 as the version.

If you are using lilo or elilo to boot the machine, you'll need to ensure
that the machine is properly prepared before rebooting.

If using LILO:
By default, lilo.conf contains an image= line that references a symlink
that always points to the correct kernel. No editing should be required
unless your machine uses a custom lilo.conf. If that is the case, be sure
that the image= line references the correct kernel file.  Either way,
you'll need to run "lilo" as root to reinstall the boot loader.

If using elilo:
Ensure that the /boot/vmlinuz symlink is pointing to the kernel you wish
to use, and then run eliloconfig to update the EFI System Partition.


+-----+

Slackware: 2021-072-01: Slackware 14.2 kernel Security Update

March 13, 2021
New kernel packages are available for Slackware 14.2 to fix security issues

Summary

Here are the details from the Slackware 14.2 ChangeLog: patches/packages/linux-4.4.261/*: Upgraded. These updates fix various bugs and security issues, including the recently announced iSCSI vulnerabilities allowing local privilege escalation. Be sure to upgrade your initrd after upgrading the kernel packages. If you use lilo to boot your machine, be sure lilo.conf points to the correct kernel and initrd and run lilo as root to update the bootloader. If you use elilo to boot your machine, you should run eliloconfig to copy the kernel and initrd to the EFI System Partition. For more information, see: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2021-27363 https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2021-27364 https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2021-27365 (* Security fix *)

Where Find New Packages

Thanks to the friendly folks at the OSU Open Source Lab (https://osuosl.org/) for donating FTP and rsync hosting to the Slackware project! :-)
Also see the "Get Slack" section on http://www.slackware.com/ for additional mirror sites near you.
Updated packages for Slackware 14.2:
Updated packages for Slackware x86_64 14.2:

MD5 Signatures

Slackware 14.2 packages: ff9a6c47fccf6d014581f5d42d3188fc kernel-generic-4.4.261-i586-1.txz a436346a1010bb22e19d6ca3378e1d46 kernel-generic-smp-4.4.261_smp-i686-1.txz 75ad52f57bcce2ac867a3ed53f889a3b kernel-headers-4.4.261_smp-x86-1.txz 03836f4982cbf694d3ed6966625d52e2 kernel-huge-4.4.261-i586-1.txz 8c86b6d61b4d6294a063e1c3a2cf9827 kernel-huge-smp-4.4.261_smp-i686-1.txz f49160e776ab57cc93a6791b5ab4a50e kernel-modules-4.4.261-i586-1.txz 53d373c6f2e4a3f88d0bb2a078cee337 kernel-modules-smp-4.4.261_smp-i686-1.txz f56f386ad659dfdbae8040cf438a1877 kernel-source-4.4.261_smp-noarch-1.txz
Slackware x86_64 14.2 packages: 82cf14abb50fd2260eb0cd67a59d5f0c kernel-generic-4.4.261-x86_64-1.txz 1a59ef6c4a8c0f2164919936b345ced8 kernel-headers-4.4.261-x86-1.txz 7ca804517bf8c0149a3eb4990c1b2c47 kernel-huge-4.4.261-x86_64-1.txz 0aeded79bd3ab9e8fa0dcb39c41023db kernel-modules-4.4.261-x86_64-1.txz 8c9075bd6abda8952efd5a5fd453ee9a kernel-source-4.4.261-noarch-1.txz

Severity
[slackware-security] Slackware 14.2 kernel (SSA:2021-072-01)
New kernel packages are available for Slackware 14.2 to fix security issues.

Installation Instructions

Installation instructions: Upgrade the packages as root: # upgradepkg kernel-*.txz If you are using an initrd, you'll need to rebuild it. For a 32-bit SMP machine, use this command (substitute the appropriate kernel version if you are not running Slackware 14.2): # /usr/share/mkinitrd/mkinitrd_command_generator.sh -k 4.4.261-smp | bash For a 64-bit machine, or a 32-bit uniprocessor machine, use this command (substitute the appropriate kernel version if you are not running Slackware 14.2): # /usr/share/mkinitrd/mkinitrd_command_generator.sh -k 4.4.261 | bash Please note that "uniprocessor" has to do with the kernel you are running, not with the CPU. Most systems should run the SMP kernel (if they can) regardless of the number of cores the CPU has. If you aren't sure which kernel you are running, run "uname -a". If you see SMP there, you are running the SMP kernel and should use the 4.4.261-smp version when running mkinitrd_command_generator. Note that this is only for 32-bit -- 64-bit systems should always use 4.4.261 as the version. If you are using lilo or elilo to boot the machine, you'll need to ensure that the machine is properly prepared before rebooting. If using LILO: By default, lilo.conf contains an image= line that references a symlink that always points to the correct kernel. No editing should be required unless your machine uses a custom lilo.conf. If that is the case, be sure that the image= line references the correct kernel file. Either way, you'll need to run "lilo" as root to reinstall the boot loader. If using elilo: Ensure that the /boot/vmlinuz symlink is pointing to the kernel you wish to use, and then run eliloconfig to update the EFI System Partition.

Related News

24.Key Code Esm H320
2 - 3 min read
The Akira ransomware group has extorted approximately $42 million from over 250 victims since January 1, 2024. The group initially focused on
5.ShakingHands Esm H320
2 - 3 min read
At The Linux Foundation's Open Source Summit North America , Linus Torvalds, the creator of Linux, discussed various topics related to Linux
30.Lock Globe Motherboard Esm H320
1 - 2 min read
The SPDX 3.0 release marks a significant milestone in software management, particularly for Linux admins, infosec professionals, internet security
11.Locks IsometricPattern Esm H320
2 - 3 min read
Open Source maintainers and developers have been warned about the continued wave of attacks aimed at project maintainers similar to those recently
28.Lock Globe Esm H320
1 - 2 min read
A resurgence of cyberattacks targeting Linux systems in Asian campaigns through the utilization of the Pupy Remote Access Trojan (RAT) has been
27.Tablet Connections Blocks Lock Esm H320
2 - 4 min read
Canonical has recently announced the Beta release of Ubuntu Linux 24.04 LTS , codenamed "Noble Numbat." This release aims to continue Ubuntu's
21.Globe RadiatingCode Esm H320
2 - 3 min read
The open-source movement has come a long way, from its origins in the 1960s and 1970s to becoming an integral part of organizations worldwide.
13.Lock StylizedMotherboard Esm H320
2 - 3 min read
The Rust-based Edera project demonstrates a unique approach to container security that addresses cloud-native computing challenges. Let's examine
Sign Up

Get the Latest News & Insights

Sign up to get the latest security news affecting Linux and open source delivered straight to your inbox.

© 2024 Guardian Digital, Inc All Rights Reserved