---------------------------------------------------------------------Fedora Update Notification
FEDORA-2005-177
2005-02-25
---------------------------------------------------------------------Product     : Fedora Core 3
Name        : radvd
Version     : 0.7.3                      
Release     : 1_FC3                  
Summary     : A Router Advertisement daemon
Description :
radvd is the router advertisement daemon for IPv6.  It listens to router
solicitations and sends router advertisements as described in "Neighbor
Discovery for IP Version 6 (IPv6)" (RFC 2461).  With these advertisements
hosts can automatically configure their addresses and some other
parameters.  They also can choose a default router based on these
advertisements.

Install radvd if you are setting up IPv6 network and/or Mobile IPv6
services.

---------------------------------------------------------------------Update Information:

Upgrade to new upstream version 0.7.3 .
---------------------------------------------------------------------* Mon Feb 21 2005 Jason Vas Dias  0.7.3-1

- Upgrade to radvd-0.7.3
- add execshield -fPIE / -pie compile / link options

* Mon Feb 21 2005 Pekka Savola  0.7.3-1

- 0.7.3.

* Mon Oct 28 2002 Pekka Savola 

- 0.7.2.

* Tue May  7 2002 Pekka Savola 

- remove '-g %{RADVD_GID}' when creating the user, which may be problematic
  if the user didn't exist before.

* Fri Apr 12 2002 Bernhard Rosenkraenzer  0.7.1-1

- 0.7.1 (bugfix release, #61023), fixes:
  - Check that forwarding is enabled when starting radvd
    (helps avoid odd problems) 
  - Check configuration file permissions (note: in setuid operation, must not
    be writable by the user.group) 
  - Cleanups and enhancements for radvdump
  - Ensure NULL-termination with strncpy even with overlong strings
    (non-criticals, but better safe than sorry) 
  - Update config.{guess,sub} to cope with some newer architectures 
  - Minor fixes and cleanups

* Mon Jan 14 2002 Pekka Savola 

- 0.7.1.

* Wed Jan  9 2002 Tim Powers 

- automated rebuild

* Tue Jan  8 2002 Pekka Savola 

- Change 'reload' to signal HUP to radvd instead or restarting.

* Fri Dec 28 2001 Pekka Savola 

- License unfortunately is BSD *with* advertising clause, so to be pedantic,
  change License: to 'BSD-style'.

* Thu Nov 22 2001 Bernhard Rosenkraenzer 

- 0.7.0

* Wed Nov 14 2001 Pekka Savola 

- spec file cleanups
- update to 0.7.0.

* Mon Jul  9 2001 Bernhard Rosenkraenzer 

- initial Red Hat Linux build

* Sun Jun 24 2001 Pekka Savola 

- add a patch from USAGI for overflow, Copyright -> License.

* Wed Jun 20 2001 Pekka Savola 

- use /sbin/service.
- update to 0.6.2pl4.

* Sat Apr 28 2001 Pekka Savola 

- update to 0.6.2pl3.

* Wed Apr 11 2001 Pekka Savola 

- update to 0.6.2pl2.

* Wed Apr  4 2001 Pekka Savola 

- update to 0.62pl1.  Bye bye patches!
- Require: initscripts (should really be with a version providing IPv6)
- clean up the init script, make condrestart work properly
- Use a static /etc/rc.d/init.d; init.d/radvd required it anyway.

* Sun Apr  1 2001 Pekka Savola 

- add patch to chroot (doesn't work well yet, as /proc is used directly)
- clean up droproot patch, drop the rights earlier; require user-writable
pidfile directory
- set up the pidfile directory at compile time.

* Sat Mar 31 2001 Pekka Savola 

- add select/kill signals patch from Nathan Lutchansky .
- add address syntax checked fix from Marko Myllynen .
- add patch to check the pid file before fork.
- add support for OPTIONS sourced from /etc/sysconfig/radvd, provide a nice
default one.
- add/delete radvd user, change the pidfile to /var/run/radvd/radvd.pid.
- fix initscript NETWORKING_IPV6 check.

* Sun Mar 18 2001 Pekka Savola 

- add droproot patch, change to nobody by default (should use radvd:radvd or
the like, really).

* Mon Mar  5 2001 Tim Powers 

- applied patch supplied by Pekka Savola in #30508
- made changes to initscript as per Pekka's suggestions

* Thu Feb 15 2001 Tim Powers 

- needed -D_GNU_SOURCE to build properly

* Tue Feb  6 2001 Tim Powers 

- use %configure and %makeinstall, just glob the manpages, cleans
  things up
- fixed initscript so that it can be internationalized in the future

* Fri Feb  2 2001 Pekka Savola 

- Create a single package(source) for glibc21 and glibc22 (automatic
Requires can handle this just fine).
- use %{_mandir} and friends
- add more flesh to %doc
- streamline %config file %attrs
- streamline init.d file a bit:
   * add a default chkconfig: (default to disable for security etc. reasons; 
     also, the default config isn't generic enough..)
   * add reload/condrestart
   * minor tweaks
   * missing: localization support (initscripts-5.60)
- use %initdir macro

* Thu Feb  1 2001 Lars Fenneberg 

- updated to new release 0.6.2

* Thu Feb  1 2001 Marko Myllynen 

- initial version, radvd version 0.6.1


---------------------------------------------------------------------This update can be downloaded from:
  
ae1847f087192da649ad90ff5d484e95  SRPMS/radvd-0.7.3-1_FC3.src.rpm
345449ba4cf8dfba84eae22b5d1f9911  x86_64/radvd-0.7.3-1_FC3.x86_64.rpm
90ffdb019516a0be1f1467babdfb927b  x86_64/debug/radvd-debuginfo-0.7.3-1_FC3.x86_64.rpm
096cccff8319777bb5b0f8093990f8a3  i386/radvd-0.7.3-1_FC3.i386.rpm
80263573365f5d976744c46761647bb2  i386/debug/radvd-debuginfo-0.7.3-1_FC3.i386.rpm

This update can also be installed with the Update Agent; you can
launch the Update Agent with the 'up2date' command.  
-----------------------------------------------------------------------fedora-announce-list mailing list
fedora-announce-list@redhat.com
http://www.redhat.com/mailman/listinfo/fedora-announce-list

Fedora Core 3 Update: radvd-0.7.3-1_FC3

February 25, 2005
Upgrade to new upstream version 0.7.3 .

Summary

radvd is the router advertisement daemon for IPv6. It listens to router

solicitations and sends router advertisements as described in "Neighbor

Discovery for IP Version 6 (IPv6)" (RFC 2461). With these advertisements

hosts can automatically configure their addresses and some other

parameters. They also can choose a default router based on these

advertisements.

Install radvd if you are setting up IPv6 network and/or Mobile IPv6

services.

Upgrade to new upstream version 0.7.3 .

- Upgrade to radvd-0.7.3

- add execshield -fPIE / -pie compile / link options

* Mon Feb 21 2005 Pekka Savola 0.7.3-1

- 0.7.3.

* Mon Oct 28 2002 Pekka Savola

- 0.7.2.

* Tue May 7 2002 Pekka Savola

- remove '-g %{RADVD_GID}' when creating the user, which may be problematic

if the user didn't exist before.

* Fri Apr 12 2002 Bernhard Rosenkraenzer 0.7.1-1

- 0.7.1 (bugfix release, #61023), fixes:

- Check that forwarding is enabled when starting radvd

(helps avoid odd problems)

- Check configuration file permissions (note: in setuid operation, must not

be writable by the user.group)

- Cleanups and enhancements for radvdump

- Ensure NULL-termination with strncpy even with overlong strings

(non-criticals, but better safe than sorry)

- Update config.{guess,sub} to cope with some newer architectures

- Minor fixes and cleanups

* Mon Jan 14 2002 Pekka Savola

- 0.7.1.

* Wed Jan 9 2002 Tim Powers

- automated rebuild

* Tue Jan 8 2002 Pekka Savola

- Change 'reload' to signal HUP to radvd instead or restarting.

* Fri Dec 28 2001 Pekka Savola

- License unfortunately is BSD *with* advertising clause, so to be pedantic,

change License: to 'BSD-style'.

* Thu Nov 22 2001 Bernhard Rosenkraenzer

- 0.7.0

* Wed Nov 14 2001 Pekka Savola

- spec file cleanups

- update to 0.7.0.

* Mon Jul 9 2001 Bernhard Rosenkraenzer

- initial Red Hat Linux build

* Sun Jun 24 2001 Pekka Savola

- add a patch from USAGI for overflow, Copyright -> License.

* Wed Jun 20 2001 Pekka Savola

- use /sbin/service.

- update to 0.6.2pl4.

* Sat Apr 28 2001 Pekka Savola

- update to 0.6.2pl3.

* Wed Apr 11 2001 Pekka Savola

- update to 0.6.2pl2.

* Wed Apr 4 2001 Pekka Savola

- update to 0.62pl1. Bye bye patches!

- Require: initscripts (should really be with a version providing IPv6)

- clean up the init script, make condrestart work properly

- Use a static /etc/rc.d/init.d; init.d/radvd required it anyway.

* Sun Apr 1 2001 Pekka Savola

- add patch to chroot (doesn't work well yet, as /proc is used directly)

- clean up droproot patch, drop the rights earlier; require user-writable

pidfile directory

- set up the pidfile directory at compile time.

* Sat Mar 31 2001 Pekka Savola

- add select/kill signals patch from Nathan Lutchansky .

- add address syntax checked fix from Marko Myllynen .

- add patch to check the pid file before fork.

- add support for OPTIONS sourced from /etc/sysconfig/radvd, provide a nice

default one.

- add/delete radvd user, change the pidfile to /var/run/radvd/radvd.pid.

- fix initscript NETWORKING_IPV6 check.

* Sun Mar 18 2001 Pekka Savola

- add droproot patch, change to nobody by default (should use radvd:radvd or

the like, really).

* Mon Mar 5 2001 Tim Powers

- applied patch supplied by Pekka Savola in #30508

- made changes to initscript as per Pekka's suggestions

* Thu Feb 15 2001 Tim Powers

- needed -D_GNU_SOURCE to build properly

* Tue Feb 6 2001 Tim Powers

- use %configure and %makeinstall, just glob the manpages, cleans

things up

- fixed initscript so that it can be internationalized in the future

* Fri Feb 2 2001 Pekka Savola

- Create a single package(source) for glibc21 and glibc22 (automatic

Requires can handle this just fine).

- use %{_mandir} and friends

- add more flesh to %doc

- streamline %config file %attrs

- streamline init.d file a bit:

* add a default chkconfig: (default to disable for security etc. reasons;

also, the default config isn't generic enough..)

* add reload/condrestart

* minor tweaks

* missing: localization support (initscripts-5.60)

- use %initdir macro

* Thu Feb 1 2001 Lars Fenneberg

- updated to new release 0.6.2

* Thu Feb 1 2001 Marko Myllynen

- initial version, radvd version 0.6.1

ae1847f087192da649ad90ff5d484e95 SRPMS/radvd-0.7.3-1_FC3.src.rpm

345449ba4cf8dfba84eae22b5d1f9911 x86_64/radvd-0.7.3-1_FC3.x86_64.rpm

90ffdb019516a0be1f1467babdfb927b x86_64/debug/radvd-debuginfo-0.7.3-1_FC3.x86_64.rpm

096cccff8319777bb5b0f8093990f8a3 i386/radvd-0.7.3-1_FC3.i386.rpm

80263573365f5d976744c46761647bb2 i386/debug/radvd-debuginfo-0.7.3-1_FC3.i386.rpm

This update can also be installed with the Update Agent; you can

launch the Update Agent with the 'up2date' command.

fedora-announce-list@redhat.com

http://www.redhat.com/mailman/listinfo/fedora-announce-list

FEDORA-2005-177 2005-02-25 Name : radvd Version : 0.7.3 Release : 1_FC3 Summary : A Router Advertisement daemon Description : radvd is the router advertisement daemon for IPv6. It listens to router solicitations and sends router advertisements as described in "Neighbor Discovery for IP Version 6 (IPv6)" (RFC 2461). With these advertisements hosts can automatically configure their addresses and some other parameters. They also can choose a default router based on these advertisements. Install radvd if you are setting up IPv6 network and/or Mobile IPv6 services. Upgrade to new upstream version 0.7.3 . - Upgrade to radvd-0.7.3 - add execshield -fPIE / -pie compile / link options * Mon Feb 21 2005 Pekka Savola 0.7.3-1 - 0.7.3. * Mon Oct 28 2002 Pekka Savola - 0.7.2. * Tue May 7 2002 Pekka Savola - remove '-g %{RADVD_GID}' when creating the user, which may be problematic if the user didn't exist before. * Fri Apr 12 2002 Bernhard Rosenkraenzer 0.7.1-1 - 0.7.1 (bugfix release, #61023), fixes: - Check that forwarding is enabled when starting radvd (helps avoid odd problems) - Check configuration file permissions (note: in setuid operation, must not be writable by the user.group) - Cleanups and enhancements for radvdump - Ensure NULL-termination with strncpy even with overlong strings (non-criticals, but better safe than sorry) - Update config.{guess,sub} to cope with some newer architectures - Minor fixes and cleanups * Mon Jan 14 2002 Pekka Savola - 0.7.1. * Wed Jan 9 2002 Tim Powers - automated rebuild * Tue Jan 8 2002 Pekka Savola - Change 'reload' to signal HUP to radvd instead or restarting. * Fri Dec 28 2001 Pekka Savola - License unfortunately is BSD *with* advertising clause, so to be pedantic, change License: to 'BSD-style'. * Thu Nov 22 2001 Bernhard Rosenkraenzer - 0.7.0 * Wed Nov 14 2001 Pekka Savola - spec file cleanups - update to 0.7.0. * Mon Jul 9 2001 Bernhard Rosenkraenzer - initial Red Hat Linux build * Sun Jun 24 2001 Pekka Savola - add a patch from USAGI for overflow, Copyright -> License. * Wed Jun 20 2001 Pekka Savola - use /sbin/service. - update to 0.6.2pl4. * Sat Apr 28 2001 Pekka Savola - update to 0.6.2pl3. * Wed Apr 11 2001 Pekka Savola - update to 0.6.2pl2. * Wed Apr 4 2001 Pekka Savola - update to 0.62pl1. Bye bye patches! - Require: initscripts (should really be with a version providing IPv6) - clean up the init script, make condrestart work properly - Use a static /etc/rc.d/init.d; init.d/radvd required it anyway. * Sun Apr 1 2001 Pekka Savola - add patch to chroot (doesn't work well yet, as /proc is used directly) - clean up droproot patch, drop the rights earlier; require user-writable pidfile directory - set up the pidfile directory at compile time. * Sat Mar 31 2001 Pekka Savola - add select/kill signals patch from Nathan Lutchansky . - add address syntax checked fix from Marko Myllynen . - add patch to check the pid file before fork. - add support for OPTIONS sourced from /etc/sysconfig/radvd, provide a nice default one. - add/delete radvd user, change the pidfile to /var/run/radvd/radvd.pid. - fix initscript NETWORKING_IPV6 check. * Sun Mar 18 2001 Pekka Savola - add droproot patch, change to nobody by default (should use radvd:radvd or the like, really). * Mon Mar 5 2001 Tim Powers - applied patch supplied by Pekka Savola in #30508 - made changes to initscript as per Pekka's suggestions * Thu Feb 15 2001 Tim Powers - needed -D_GNU_SOURCE to build properly * Tue Feb 6 2001 Tim Powers - use %configure and %makeinstall, just glob the manpages, cleans things up - fixed initscript so that it can be internationalized in the future * Fri Feb 2 2001 Pekka Savola - Create a single package(source) for glibc21 and glibc22 (automatic Requires can handle this just fine). - use %{_mandir} and friends - add more flesh to %doc - streamline %config file %attrs - streamline init.d file a bit: * add a default chkconfig: (default to disable for security etc. reasons; also, the default config isn't generic enough..) * add reload/condrestart * minor tweaks * missing: localization support (initscripts-5.60) - use %initdir macro * Thu Feb 1 2001 Lars Fenneberg - updated to new release 0.6.2 * Thu Feb 1 2001 Marko Myllynen - initial version, radvd version 0.6.1 ae1847f087192da649ad90ff5d484e95 SRPMS/radvd-0.7.3-1_FC3.src.rpm 345449ba4cf8dfba84eae22b5d1f9911 x86_64/radvd-0.7.3-1_FC3.x86_64.rpm 90ffdb019516a0be1f1467babdfb927b x86_64/debug/radvd-debuginfo-0.7.3-1_FC3.x86_64.rpm 096cccff8319777bb5b0f8093990f8a3 i386/radvd-0.7.3-1_FC3.i386.rpm 80263573365f5d976744c46761647bb2 i386/debug/radvd-debuginfo-0.7.3-1_FC3.i386.rpm This update can also be installed with the Update Agent; you can launch the Update Agent with the 'up2date' command. fedora-announce-list@redhat.com http://www.redhat.com/mailman/listinfo/fedora-announce-list

Change Log

References

Update Instructions

Severity
Name : radvd
Version : 0.7.3
Release : 1_FC3
Summary : A Router Advertisement daemon

Related News